Categories : FAQ

Miter Template needed, for rain gutters.
Also, please be sure to explain how to make the tabs to fasten the gutter together.

Written by: Rain Gutter Cleaners

2 Responses to “how to I make a custom cut miter for a rain gutter?”

  1. sadistdave says:

    When you cross any two linear materials, there are 4 “V”s.

    The “inside” V, and the “outside” V are your custom miter angles.

    With a straight edge and a pencil, mark your cut on both pieces.

    Cut your custom miter.

    You can make a template by first using 2 pieces of lumber to find and cut your angle. Then transfer that angle to your gutters.

    -SD-

  2. duc602 says:

    you need to know the angle of it, and with the brackets on each side of the cut so it doesnt collapse when you start cutting it turn your saw blade backwards when you cut it also.i used to run a gutter company and i do know what i am talking about . you use a rivet gun and when you overlap your bottom cuts you rivet it. and use a good gutter seal to seal your joints